This is a custom-built under front seat sub enclosure for a 2004-2015 Nissan Titan King/Crew Cab (KC/CC) pickup made to house (2) Image Dynamics CTX-104 subwoofers. An Image Dynamics I2300 2-Channel amplifier is included to power the sub, and we will include the wiring kit you need for the installation. 

Starting with the highest grade MDF, the box is designed and sized to accommodate your subwoofers.  The inside is then sealed and coated with fiberglass resin for additional strength.  The exterior will be wrapped with carpet (NOT trunk liner) to match your vehicle's factory carpet as closely as possible. Please select the carpet color when ordering. The front of the box, visible if looking under the seat, will have a TITAN or Titan burger logo (or any 9-letter logo or symbol of your choice) inlaid under the carpet.

This package consists of: 

(1) Custom Tech12volt underseat sub enclosure
(2) Image Dynamics CTX-104 subwoofers
(1) Image Dynamics I2300 2-Channel Amplifier
(1) 8-gauge wire kit

Image Dynamics CTX-104 Subwoofer Specs:

• 10" Single 4 ohm CTX Series Subwoofer
• Power Handling:
• Peak: 350 watts
• RMS: 175 watts
• Recommended Power Range: 50-350 watts
• Poly-mica cone woofer
• Butyl rubber surround
• Conex spider with integrated tinsel leads
• Long linear excursion
• Frequency response: 18-180 Hz
• Nominal Impedance = 3.9 ohm
• Rated RMS power handling = 350W
• Sensitivity = 885 dB
• Fs = 23.3 Hz
• Qes = 0.547
• Qms = 3.64
• Qts  = 0.476
• Xmax = 16 mm
• Mms = 353 g
• Vas = 60.87 L
• 1-year Manufacturer's Warranty

Image Dynamics I2300 Amplifier Specs:

• 2-Channel Class AB i Series Car Amplifier
• RMS Power Rating:
• 4 ohms: 75 watts x 2 chan.
• 2 ohms: 125 watts x 2 chan.
• Bridged, 4 ohms: 250 watts x 1 chan.
• CEA Power Rating @ 14.4V:
• 2 ohms: 150 watts x 2 chan.
• Pulse Width Modulated MOSFET power supply
• LED status indicator
• Fully adjustable bass EQ (0-18 dB @ 40 Hz)
• Soft delay remote turn on/off circuit to eliminate pops and clicks
• 2/1 Channel operation
• Low level line inputs and outputs
• 3-Way System Protection circuitry (thermal, DC, and speaker short protection)
• Remote bass level sold separately
• Heavy duty aluminum finned heatsink for extreme heat dissipation
• Silver-plated RCA level inputs
• Silver-plated screw terminals
• Input sensitivity: 0.5V-4.0V
• Variable High-Pass Filter (40-250 Hz)
• Variable Low-Pass Filter (40-250 Hz)
• Crossover Slope: 12 dB
• Damping Factor: >150
• THD (Total Harmonic Distortion): 0.5%
• Frequency Response: 20-22,000 Hz
• Signal-to-Noise Ratio: >94 dB
• Fuse Rating: 2 x 25 amp
• Dimensions: 13-3/4"L x 8"W x 2-1/4"H

  SQ600XS-600 WATT KIT includes: 

• 17ft Translucent Blue power wire
• 3ft Translucent Silver ground wire
• 17ft Translucent Blue Twisted Pair RCA interconnects
• 3ft Black Flex loom tubing
• 16ft blue remote turn-on wire
• 20ft Translucent Speaker Cable
• 1pc AGU Fuseholder, with 150A fuse
• 2 pcs Satin Ring Terminals
• 2 pcs Satin Spade Terminals
• 10 pcs 4in. Black Cable Ties
• 2 pcs Splice Connectors

A build sheet for vehicle specifics will be sent upon receipt of payment.